Shyam Ferro Alloys Ltd. has adopted the most acceptable  quality  systems right  from  the Raw  Material  feeding to  the furnace to finished product  handling.  Raw  Material  feeding  is  consists  of  inspection  and  quality  control  followed  by   Lab reports  on various raw materials    based   on  IS   1473-1960   amendment  for   Manganese  Ores   and   other   IS  Amendments   for   reluctant    and   fluxes.  After   ensuring   these   reports   by   process metallurgists  the  raw  materials inspection   will   be  conducted  by   verifying  physical   and chemical  characteristics   prior  to  feeding  into   the   furnace  through   batch   weighing  system. After getting the desired end  product called the finished product i.e.,High Carbon Ferro Manganese    metal,  it will be  once again tested in the laboratory for inspection and quality  control   measures .  This  will   be   carried   out  within  2  to 3  hours  interval  by taking hot  samples of the end  product and verified  for  its  chemical  specifications  and these  test reports will  be  given  to process metallurgists  for taking corrective measures if required. The Hot molten metal  is collected  in  casting  pans  instead  of  sand  pockets  contamination  further  slag   is  systematically removed  in  molten  stage itself  to   avoid  slag    mixing    in    the  pure   metal.   The   finished   product   confirms   to     customers   required   sized    and   stacked in  specified   stockyards  size   wise  in respective platforms and yards.